STAS dibond hanger self-adhesive hook - 100 x 200mm - 10kg load capacity + installation kit

The STAS dibond hanger is a self-adhesive aluminium plate with a hook, which can be attached to the back of flat panels. We offer the STAS dibond hanger in various sizes, each with its own load-bearing capacity. The tape, which is on the back of the STAS dibond hanger, comes from the brand tesa® and is of high quality. We supply a special cleaning cloth with the STAS dibond pendant, which should be used to make the surface grease- and dust-free.

The STAS dibond hanger is suitable for mounting on the back of flat panels such as mirrors and art/photos on acrylic, glass, dibond or aluminium*. An attachment to wood or MDF is possible by mounting screws in the screw holes provided on the STAS dibond hanger. In this way, the tape fastening of a stuck-on STAS dibond pendant on flat panels can also be strengthened. *Rough, porous or fibrous surfaces (wood/MDF/plasterboard/plaster blocks) and Polypropylene/Polyethylene (PP/PE) plastics (e.g. Plexiglas) are not suitable for sticking on the STAS dibond pendant.

NOTE: It is very important that you make the back of the object you want to hang grease- and dust-free with the included cleaner cloth. For degreasing, you can also use the special 3M VHB Cleaner, which is also available through this webshop. Allow the cleaner to dry thoroughly. Then press the STAS dibond pendant firmly for 10 seconds and leave to dry for 24 hours.

The STAS dibond hanger is easy to use in combination with a hanging rail, which also allows you to hang several wall decorations underneath each other.

Disclaimer STAS dibond hanger
It is the user's responsibility to carry out the assembly of the STAS dibond pendant in strict accordance with the assembly instructions provided. All technical information and data are provided on the basis of quality tests and our many years of practical experience. These are considered an average value and are not suitable for specification. For this reason, STAS picture hanging systems cannot provide any guarantee, explicit or implicit, regarding the suitability of the STAS dibond pendant for whatever the user wishes to hang. The user is therefore responsible for determining whether the STAS dibond pendant is suitable for the situation in question. If in doubt, our staff will be happy to advise you.