STAS Dibond Hanger Self-Adhesive Hook - 90 mm Round - Up to 3.5 kg

STAS dibond hanger self-adhesive hook - 90mm round - 3.5kg capacity + installation set
STAS self-adhesive hook / dibond hanger product sheet

This set includes:
- Cleaning tissue
- Self-adhesive hanger 90 x 1mm round, fitted with foam tape
- Instruction sticker dibond hangers
- Wall bracket for dibond hanger
- STAS dome head screw alu
- STAS plug 6 x 30 mm for hard / soft wall

The STAS dibond hanger is a self-adhesive aluminium plate with a hook that can be attached to the back of flat panels. We offer the STAS dibond hanger in various sizes, each with its own load capacity. The tape on the back of the STAS dibond hanger is from the tesa® brand and of high quality. With the STAS dibond hanger we supply a special cleaner tissue that should be used to make the surface free of grease and dust.

The STAS dibond hanger is suitable for sticking onto the back of flat panels such as mirrors and art/photos on acrylic, glass, dibond or aluminium*. Mounting on wood or MDF is possible by fitting screws into the existing screw holes of the STAS dibond hanger. This also lets you reinforce the tape attachment of a stuck-on STAS dibond hanger on flat panels. *Rough, porous or fibrous surfaces (wood/MDF/plasterboard/plaster blocks) and polypropylene/polyethylene (PP/PE) plastics (including Plexiglas) are not suitable for sticking on the STAS dibond hanger.

PLEASE NOTE! It is very important that you make the back of the object you want to hang free of grease and dust with the supplied cleaner tissue. For degreasing you can also use the special 3M VHB Cleaner, which is also available through this webshop. Let the cleaner dry well. Then press the STAS dibond hanger firmly for 10 seconds and let it dry for 24 hours.

The STAS dibond hanger is easy to use in combination with a hanging rail, allowing you to hang several wall decorations beneath one another.

Disclaimer STAS dibond hanger
It is the user's responsibility to carry out the mounting of the STAS dibond hanger in strict accordance with the supplied mounting instructions. All technical information and data are provided on the basis of quality tests and our many years of practical experience. These are regarded as an average value and are not suitable as a specification. For this reason STAS picture hanging systems cannot provide any guarantee, explicit or implicit, regarding the suitability of the STAS dibond hanger for what the user wishes to hang. The user is therefore responsible for determining whether the STAS dibond hanger is suitable for the situation in question. In case of doubt our staff will be happy to advise you.